{"id":14255,"date":"2023-03-29T12:58:53","date_gmt":"2023-03-29T12:58:53","guid":{"rendered":"https:\/\/the3dsourced.wpengine.com\/?p=14255"},"modified":"2023-04-05T02:47:21","modified_gmt":"2023-04-05T02:47:21","slug":"3d-printing-raft-brim-skirt","status":"publish","type":"post","link":"https:\/\/www.3dsourced.com\/rigid-ink\/3d-printing-raft-brim-skirt\/","title":{"rendered":"3D Printing Skirt vs Brim vs Raft (Full Comparison)"},"content":{"rendered":"<p>It\u2019s widely agreed in the 3D printing community that a smooth and correct first layer makes or breaks a print. In most instances, getting that first layer to adhere is 90% of the battle.<\/p>\n\n\n\n<p>Well, you can think of rafts, brims, and skirts as your secret weapons to <a data-lasso-id=\"6476\" href=\"https:\/\/www.3dsourced.com\/rigid-ink\/3d-prints-warping-curling-how-to-prevent\/\" data-type=\"post\" data-id=\"14187\" target=\"_blank\" rel=\"noopener\">prevent warping in 3D printing<\/a>.<\/p>\n\n\n\n<p><strong>Generally, rafts are a touch more reliable for first-layer adhesion, while brims are easier to remove and require less filament to pro<\/strong><\/p>\n\n\n\n<p><strong>Skirts are another useful tool for leveling the bed (which will help with adhesion), but they don&#8217;t physically support the print like rafts and brims do.<\/strong><\/p>\n\n\n\n<p>In this article, I&#8217;ll step you through the best methods I&#8217;ve found to use rafts, brims, and skirts to dramatically increase 1<sup>st<\/sup>&nbsp;layer reliability.<\/p>\n\n\n\n<p>We&#8217;ll also take a look at little-known ways these tools can prevent other printing problems, such as over or under-extrusion and even mid-print cracking.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0714\/6487\/files\/Rigid.ink_Soundbite_Rafts_Brims_Skirts.jpg?v=1504179633\" alt=\"Best Way To Improve Heated Bed Adhesion with rafts, brims and skirts\"\/><\/figure>\n\n\n<div class=\"gb-container gb-container-bfb855a9 no-title-margin gb-container-957d400e\" id=\"top-picks-pattern\"><div class=\"gb-inside-container\">\n\n<h2 class=\"gb-headline gb-headline-17cc458d gb-headline-text gb-headline-ec7f6a68\">Brims, Skirts and Rafts &#8211; Pros, Cons, and Removal<\/h2>\n\n\n\n<p class=\"gb-headline gb-headline-d3ec7912 gb-headline-text gb-headline-1837b1dd\"><strong><a href=\"#h-what-is-a-raft-in-3d-printing\">Rafts<\/a><\/strong><\/p>\n\n\n\n<p class=\"gb-headline gb-headline-1df6f7b4 gb-headline-text gb-headline-1837b1dd\"><strong><a href=\"#h-what-is-a-3d-printing-brim-or-sidewalk\">Brims (or &#8220;Sidewalks&#8221;)<\/a><\/strong><\/p>\n\n\n\n<p class=\"gb-headline gb-headline-744708c8 gb-headline-text gb-headline-1837b1dd\"><a href=\"#h-what-is-a-3d-printing-skirt\"><strong>Skirts<\/strong><\/a><\/p>\n\n<\/div><\/div>\n\n\t\t\t\t<div class=\"wp-block-uagb-table-of-contents uagb-toc__align-left uagb-toc__columns-1 uagb-toc__collapse uagb-block-58826512\"\n\t\t\t\t\tdata-scroll= \"1\"\n\t\t\t\t\tdata-offset= \"30\"\n\t\t\t\t\tstyle=\"\"\n\t\t\t\t>\n\t\t\t\t<div class=\"uagb-toc__wrap\">\n\t\t\t\t\t\t<div class=\"uagb-toc__title\">\n\t\t\t\t\t\t\tTable Of Contents\t\t\t\t\t\t\t\t\t\t\t\t\t<svg xmlns=\"https:\/\/www.w3.org\/2000\/svg\" viewbox= \"0 0 384 512\"><path d=\"M192 384c-8.188 0-16.38-3.125-22.62-9.375l-160-160c-12.5-12.5-12.5-32.75 0-45.25s32.75-12.5 45.25 0L192 306.8l137.4-137.4c12.5-12.5 32.75-12.5 45.25 0s12.5 32.75 0 45.25l-160 160C208.4 380.9 200.2 384 192 384z\"><\/path><\/svg>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<div class=\"uagb-toc__list-wrap\">\n\t\t\t\t\t\t<ol class=\"uagb-toc__list\"><li class=\"uagb-toc__list\"><a href=\"#brims-skirts-and-rafts-pros-cons-and-removal\">Brims, Skirts and Rafts &#8211; Pros, Cons, and Removal<\/a><\/li><li class=\"uagb-toc__list\"><a href=\"#what-is-a-raft-in-3d-printing\">What is a Raft in 3D Printing?<\/a><\/li><ul class=\"uagb-toc__list\"><li class=\"uagb-toc__list\"><a href=\"#cons-of-using-rafts\">Cons of Using Rafts<\/a><\/li><ul class=\"uagb-toc__list\"><li class=\"uagb-toc__list\"><a href=\"#rafts-can-be-hard-to-remove\">Rafts can be hard to remove<\/a><\/li><li class=\"uagb-toc__list\"><a href=\"#thrown-away-after-use\">Thrown away after use<\/a><\/li><\/li><\/ul><li class=\"uagb-toc__list\"><a href=\"#how-to-remove-a-raft-from-3d-print\">How to Remove a Raft From 3D print<\/a><\/li><\/li><\/ul><\/li><li class=\"uagb-toc__list\"><a href=\"#what-is-a-3d-printing-brim-or-sidewalk\">What is a 3D Printing Brim or \u2018Sidewalk\u2019?<\/a><\/li><ul class=\"uagb-toc__list\"><li class=\"uagb-toc__list\"><a href=\"#3d-printing-brim-vs-raft\">3D printing brim vs raft<\/a><\/li><\/li><\/ul><\/li><\/ul><\/li><li class=\"uagb-toc__list\"><a href=\"#what-is-a-3d-printing-skirt\">What is a 3D Printing Skirt?<\/a><\/li><\/ul><\/ul><\/ol>\t\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\n\n\n<h2 class=\"wp-block-heading\" id=\"h-what-is-a-raft-in-3d-printing\"><strong>What is a Raft in 3D Printing?<\/strong><\/h2>\n\n\n\n<p><strong>A 3D printed raft is basically a throwaway horizontal surface that sits under your object, to help with bed adhesion. It\u2019s made up of a predetermined number of layers, with a specific infill percentage, that extends a specific distance away from the sides of your object.<\/strong><\/p>\n\n\n\n<p>Some materials, like <a href=\"https:\/\/www.3dsourced.com\/3d-printer-materials\/abs-filament\/\" target=\"_blank\" rel=\"noopener\" data-lasso-id=\"6478\">ABS<\/a>, greatly benefit from the use of a raft. The raft is laid down first to the specified layer depth, then the object is printed on top of the raft.<\/p>\n\n\n\n<p>Don&#8217;t worry, a predetermined small distance will exist between the 3D print raft and the object which will aid in the removal of the raft after the object cools. So providing it&#8217;s correctly set up for your material (we explain below), popping it off your print later should be easy.&nbsp;<\/p>\n\n\n\n<p>Due to its larger surface area, the raft greatly improves adhesion. It also reduces warping in the object itself, since the edges of the raft are much more likely to warp, leaving the bottom of the object level and square.<\/p>\n\n\n\n<p>A raft can also be used to provide greater stability to objects that have small footprints. It can also give an object a solid foundation. This becomes important when printing larger objects or objects that may tend to be top-heavy.<\/p>\n\n\n\n<p>Rafts can also be used to compensate for any tiny inaccuracies in the build plate calibration or even out warped heatbeds, scratches, or dents.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0714\/6487\/files\/Rigid.ink_Diagrams_Raft.jpg?v=1504179495\" alt=\"3D Printed Raft\"\/><\/figure>\n\n\n\n<p>Here are some terms that you may want to adjust in your <a href=\"https:\/\/www.3dsourced.com\/3d-software\/best-3d-slicer-printer-software\/\" target=\"_blank\" rel=\"noopener\" data-lasso-id=\"6479\">3D slicer<\/a> when&nbsp;3D printing rafts to get better results, or just use less filament:<\/p>\n\n\n\n<ul>\n<li><strong>Separation Distance<\/strong>&nbsp;\u2013 This setting is perhaps the most important, it determines the height of the space between the top of the raft and the bottom of your print. It\u2019s a balance between ensuring the print is close enough that it adheres to the raft when the print begins and there\u2019s enough air gap to ensure easy removal once the print is finished. Usually 0.1mm is enough, but this may want to be increased with more flexible materials.<\/li>\n\n\n\n<li><strong>Above Raft Speed<\/strong>&nbsp;\u2013 This is the speed at which the first layer is printed on top of the raft. This layer wants to be slow to aid adhesion.<\/li>\n\n\n\n<li><strong>Raft Top Layers<\/strong>&nbsp;\u2013 This is how many layers on the top of your raft. These will be the surface the bottom of your print will rest on. So you\u2019ll need 2-3 layers to ensure a smooth surface. Increase the layers if you\u2019re getting pillowing on the bottom of your print.<\/li>\n\n\n\n<li><strong>Raft Base Layer&nbsp;<\/strong>\u2013 These are the first, thick, and slow-printed layers on the base of the raft. It\u2019s important these adhere correctly or the rest of the print likely won\u2019t work.<\/li>\n<\/ul>\n\n\n\n<p>It should be noted that some <a href=\"https:\/\/www.3dsourced.com\/rankings\/best-fdm-3d-printer\/\" target=\"_blank\" rel=\"noopener\" data-lasso-id=\"6480\">FDM printers<\/a> always need to use rafts, while others may never need them. For example, Zortrax printers use a perforated heated build plate. Because the build plate is perforated, a raft must be used every time an object is printed.<\/p>\n\n\n\n<p>On the other hand, printers with solid heated plates can greatly reduce the need for rafting, since the higher temperatures of the build plate surface can improve adhesion significantly with a corresponding reduction in warping.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Cons of Using Rafts<\/h3>\n\n\n\n<h4 class=\"wp-block-heading\">Rafts can be hard to remove<\/h4>\n\n\n\n<p>Some of the cons of using rafts are that in some slicer settings, they can be hard to remove (some more flexible materials can be harder to \u2018pop\u2019 away) and that the bottom won\u2019t be that super smooth, glass-like surface you\u2019ll get when printing straight onto the bed surface.<\/p>\n\n\n\n<h4 class=\"wp-block-heading\">Thrown away after use<\/h4>\n\n\n\n<p>And of course, it can upsetting to have to print a raft, that\u2019ll be disposed of straight after use using good filament. But you&#8217;ve got to remember, without the raft in some instances that print may have been destined for the rubbish anyway. &nbsp;<\/p>\n\n\n\n<p>3D printing raft removal is best done using similar tools you\u2019d use to get the print off of the bed in the first place.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"h-how-to-remove-a-raft-from-3d-print\">How to Remove a Raft From 3D print<\/h3>\n\n\n\n<p><strong>Place a thin scraper or wide knife between the base of your print and gently ease up that side, away from the raft. Once one edge of the raft has come away, it\u2019s easier to remove the rest.<\/strong><\/p>\n\n\n\n<p>Occasionally you may need some 400 grit sandpaper to smooth off the base, if you had a harder time removing the 3D printer raft.<\/p>\n\n\n\n<p>In some instances people find that they can only get a print to stick to the bed when using a raft and not when just printing directly onto the surface. This could be because your default settings for the raft are a slower, thicker first layer with the fans off.<\/p>\n\n\n\n<p>If this is the case, when trying to print without a raft, you may want to try mimic the settings on that first raft layer to aid adhesion.<\/p>\n\n\n\n<p>Wondering the differences between a 3D printing raft vs brim? Read on to find out more.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0714\/6487\/files\/Rigid.ink_Diagrams_Brim.jpg?v=1504179543\" alt=\"3D Printed Brim\"\/><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-what-is-a-3d-printing-brim-or-sidewalk\"><strong>What is a 3D Printing Brim or \u2018Sidewalk\u2019?<\/strong><\/h2>\n\n\n\n<p>Think of a brim as a close relative of a raft. As was discussed above, a raft is a stabilizing base that extends completely under a printed object to improve adhesion.<\/p>\n\n\n\n<p>A brim, on the other hand, only extends outward from the perimeter of an object, it has no contact with the object\u2019s underside. So what is a brim in 3D printing? Well, think of the brim of a hat and you\u2019ve got the right idea.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">3D printing brim vs raft<\/h3>\n\n\n\n<p>Both rafts and brims help with adhesion and both can be used to stabilize objects that have very small contact points with the print surface. However, for smaller or more delicate objects, a brim may be preferable to a raft due to the fact that its only contact with an object is along the outside edge in a very thin layer.<\/p>\n\n\n\n<p>Some materials require brims more than others. For example, ABS can warp if you\u2019re not using the correct printing settings or bed surface (or just using cheap ABS). So it may be worth&nbsp;it to 3D print brim around ABS parts to aid adhesion.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0714\/6487\/files\/combined.png?v=1504171896\" alt=\"3D Printed Raft, Brim and Skirt\"\/><figcaption class=\"wp-element-caption\"><em>&nbsp;Here we have, in order of left to right: Raft, Brim &amp; Skirt (screenshots courtesy of Simplify3D)<\/em><\/figcaption><\/figure>\n\n\n\n<p class=\"gb-headline gb-headline-de4cab23\"><span class=\"gb-icon\"><svg aria-hidden=\"true\" role=\"img\" height=\"1em\" width=\"1em\" viewbox=\"0 0 256 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path fill=\"currentColor\" d=\"M224.3 273l-136 136c-9.4 9.4-24.6 9.4-33.9 0l-22.6-22.6c-9.4-9.4-9.4-24.6 0-33.9l96.4-96.4-96.4-96.4c-9.4-9.4-9.4-24.6 0-33.9L54.3 103c9.4-9.4 24.6-9.4 33.9 0l136 136c9.5 9.4 9.5 24.6.1 34z\"><\/path><\/svg><\/span><span class=\"gb-headline-text\"><strong>Read more: <\/strong>the <a href=\"https:\/\/www.3dsourced.com\/3d-printers\/best-abs-3d-printer\/\" target=\"_blank\" rel=\"noopener\" data-lasso-id=\"6481\">best ABS 3D printers<\/a><\/span><\/p>\n\n\n\n<p>More so on support structures, that tend to be narrower and have a low surface area on the bed. These can easily pop off the bed, so it\u2019s wise to print supports with brims, just in case.<\/p>\n\n\n\n<p>This is especially true when using a low adhesion support like our Break Away. As the name suggests, it\u2019s formulated to easily snap off your model after printing, leaving a smooth finish under the model and mess of dissolving like you\u2019d need to with <a href=\"https:\/\/www.3dsourced.com\/3d-printer-materials\/pva-filament-3d-printing-guide\/\" target=\"_blank\" rel=\"noopener\" data-lasso-id=\"6482\">PVA<\/a> or <a href=\"https:\/\/www.3dsourced.com\/3d-printer-materials\/hips-filament-3d-printing\/\" target=\"_blank\" rel=\"noopener\" data-lasso-id=\"6483\">HIPS<\/a> soluble supports.<\/p>\n\n\n\n<p>This means that removing a brim from this type of object will be easier than removing a raft. This, in turn, means that there is less chance of damaging your smaller object during the removal process. Worth knowing when considering brim 3D printing.&nbsp;<\/p>\n\n\n\n<p>Then again you may just want to sand off the base of the print, if there are any rough sections left over. A deburring tool is also a great way to remove brims.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-what-is-a-3d-printing-skirt\"><strong>What is a 3D Printing Skirt?<\/strong><\/h2>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0714\/6487\/files\/Rigid.ink_Diagrams_Skirt.jpg?v=1504179583\" alt=\"3D Printed Skirt\"\/><\/figure>\n\n\n\n<p>Skirts are the most common, it\u2019s likely your slicer adds a Skirt to the beginning of each print. A 3D print skirt is nothing more than a brim that doesn\u2019t touch the edges of the object that you\u2019re printing.<\/p>\n\n\n\n<p>Skirts have a couple of uses and are usually just a couple of layers thick. First, they are an excellent way to get a preview of how your equipment is working and how a material is flowing \u2013 it\u2019s easy to ensure the material is extruding nicely and laying on the bed correctly before the actual printing of your model starts.&nbsp;<\/p>\n\n\n\n<p>You simply run a skirt that\u2019s only a few outlines wide at a relatively low print speed so that you can get a good look at what\u2019s going on. If the skirt prints cleanly, then you let the print continue. If it doesn\u2019t, you can abort the print and make the necessary adjustments, saving you both time and money.<\/p>\n\n\n\n<p>Skirts can also be useful as thermal barriers. One way is printing them wide over the bed, to insulate it and keep the temp up where your print it.<\/p>\n\n\n\n<p>Or alternatively let\u2019s say that you want to insulate the object that you\u2019re printing from temperature variations caused by room drafts.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0714\/6487\/files\/Rigid.ink_Soundbite_Rafts_Brims_Skirts.jpg?v=1504179633\" alt=\"What is a 3D Printed Skirt Used For?\"\/><\/figure>\n\n\n\n<p>For example, printing&nbsp;<a href=\"https:\/\/www.3dsourced.com\/3d-printer-materials\/asa-filament-complete-guide\/\" target=\"_blank\" rel=\"noopener\" data-lasso-id=\"6484\">UV resistant ASA&nbsp;filament<\/a> (like ABS) is very sensitive to cooling too quickly, and can crack when printing in a drafty environment. The height of the skirt can be adjusted so that it is as tall as your object. The skirt protects the object from drafts, insuring even cooling during printing.<\/p>\n\n\n\n<p>When used this way they can be called a draft \/ draught shield.&nbsp;<\/p>\n\n\n\n<p>Finally, if your <a href=\"https:\/\/www.3dsourced.com\/3d-printers\/dual-extruder-3d-printer\/\" target=\"_blank\" rel=\"noopener\" data-lasso-id=\"6485\">printer has dual extruders<\/a>, you can use a skirt as tall as your object to prevent stringing and blobbing. The skirt catches any material that may be oozing from the secondary extruder before it moves to the main object. When used this way, they&#8217;re referred to as an ooze shield.&nbsp;<\/p>\n\n\n\n<p>Rafts, brims and skirts are an easy way to get better results when you print. Yes, you do use more filament when you print a raft, brim or skirt. You also use more filament when you have to scrap a print job due to a problem that a raft, brim or skirt could prevent.<\/p>\n\n\n\n<p>In short, a couple of ounces of prevention, in the form of a raft brim or skirt, is a good bet when it comes to getting great results from your printing efforts.<\/p>\n\n\n\n<p><strong>Related articles:<\/strong><\/p>\n\n\n\n<ul>\n<li><a data-lasso-id=\"6486\" href=\"https:\/\/www.3dsourced.com\/rigid-ink\/clogged-extruder-nozzle-how-to-avoid-and-fix\/\" data-type=\"post\" data-id=\"14205\" target=\"_blank\" rel=\"noopener\">Clogged extruder &#8211; how to fix<\/a><\/li>\n\n\n\n<li><a data-lasso-id=\"6487\" href=\"https:\/\/www.3dsourced.com\/rigid-ink\/3d-prints-warping-curling-how-to-prevent\/\" data-type=\"post\" data-id=\"14187\" target=\"_blank\" rel=\"noopener\">3D printing warping &#8211; how to fix<\/a><\/li>\n\n\n\n<li><a data-lasso-id=\"6488\" href=\"https:\/\/www.3dsourced.com\/rigid-ink\/how-to-untangle-filament\/\" data-type=\"post\" data-id=\"15205\" target=\"_blank\" rel=\"noopener\">How to untangle filament<\/a><\/li>\n\n\n\n<li><a href=\"https:\/\/www.3dsourced.com\/guides\/3d-print-not-sticking-to-bed-problems-fixed\/\" target=\"_blank\" data-type=\"post\" data-id=\"18676\" rel=\"noopener\" data-lasso-id=\"13920\">3D print not sticking: how to fix<\/a><\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>It\u2019s widely agreed in the 3D printing community that a smooth and correct first layer makes or breaks a print. In most instances, getting that first layer to adhere is 90% of &#8230; <a title=\"3D Printing Skirt vs Brim vs Raft (Full Comparison)\" class=\"read-more\" href=\"https:\/\/www.3dsourced.com\/rigid-ink\/3d-printing-raft-brim-skirt\/\" aria-label=\"More on 3D Printing Skirt vs Brim vs Raft (Full Comparison)\">Read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":30860,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"om_disable_all_campaigns":false,"_uag_custom_page_level_css":""},"categories":[32,7],"tags":[],"featured_post":[],"post_template":[],"acf":[],"uagb_featured_image_src":{"full":["https:\/\/www.3dsourced.com\/wp-content\/uploads\/2023\/03\/3D-Printing-Skirt-vs-Brim-vs-Raft.jpg",1280,720,false],"thumbnail":["https:\/\/www.3dsourced.com\/wp-content\/uploads\/2023\/03\/3D-Printing-Skirt-vs-Brim-vs-Raft-150x150.jpg",150,150,true],"medium":["https:\/\/www.3dsourced.com\/wp-content\/uploads\/2023\/03\/3D-Printing-Skirt-vs-Brim-vs-Raft-300x169.jpg",300,169,true],"medium_large":["https:\/\/www.3dsourced.com\/wp-content\/uploads\/2023\/03\/3D-Printing-Skirt-vs-Brim-vs-Raft-768x432.jpg",768,432,true],"large":["https:\/\/www.3dsourced.com\/wp-content\/uploads\/2023\/03\/3D-Printing-Skirt-vs-Brim-vs-Raft-1024x576.jpg",1024,576,true],"1536x1536":["https:\/\/www.3dsourced.com\/wp-content\/uploads\/2023\/03\/3D-Printing-Skirt-vs-Brim-vs-Raft.jpg",1280,720,false],"2048x2048":["https:\/\/www.3dsourced.com\/wp-content\/uploads\/2023\/03\/3D-Printing-Skirt-vs-Brim-vs-Raft.jpg",1280,720,false]},"uagb_author_info":{"display_name":"3dsourced","author_link":"https:\/\/www.3dsourced.com\/author\/3dsourced\/"},"uagb_comment_info":2,"uagb_excerpt":"It\u2019s widely agreed in the 3D printing community that a smooth and correct first layer makes or breaks a print. In most instances, getting that first layer to adhere is 90% of ... Read more","_links":{"self":[{"href":"https:\/\/www.3dsourced.com\/wp-json\/wp\/v2\/posts\/14255"}],"collection":[{"href":"https:\/\/www.3dsourced.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.3dsourced.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.3dsourced.com\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.3dsourced.com\/wp-json\/wp\/v2\/comments?post=14255"}],"version-history":[{"count":6,"href":"https:\/\/www.3dsourced.com\/wp-json\/wp\/v2\/posts\/14255\/revisions"}],"predecessor-version":[{"id":30862,"href":"https:\/\/www.3dsourced.com\/wp-json\/wp\/v2\/posts\/14255\/revisions\/30862"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.3dsourced.com\/wp-json\/wp\/v2\/media\/30860"}],"wp:attachment":[{"href":"https:\/\/www.3dsourced.com\/wp-json\/wp\/v2\/media?parent=14255"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.3dsourced.com\/wp-json\/wp\/v2\/categories?post=14255"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.3dsourced.com\/wp-json\/wp\/v2\/tags?post=14255"},{"taxonomy":"featured_post","embeddable":true,"href":"https:\/\/www.3dsourced.com\/wp-json\/wp\/v2\/featured_post?post=14255"},{"taxonomy":"post_template","embeddable":true,"href":"https:\/\/www.3dsourced.com\/wp-json\/wp\/v2\/post_template?post=14255"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}